1.4 OPTIONS AND ACCESSORIES
Automatic Diskette Eject
Ejects the diskettes from the disk drive, when the door lever is released.
The disk drive is set to the Not Ready State (when the diskette is
Head Load Solenoid
Allows the host system to Load/Unload the Read/Write heads in the disk
drive via an interface signal line.
Rotates the diskette (to full speed) and retracts the Read/Write heads to
Track 00, whenever power is turned-on.
Allows the door lever to be locked, to prevent media removal, when the
drive is selected or when In Use is selected.
Allows the Ready signal to be active whenever the door is closd
regardless of Drive Selection.
TS-021-0l3087 ••• 01