Sony VAIO PCG-F610 User Manual page 52

To attach your computer to the port replicator
To supply power to your computer while it is connected to the port replicator,
you can connect the AC adapter directly to the port replicator.
When attaching your computer to the port replicator, do not attempt to insert or
remove the battery pack. Lifting and turning the computer with an attached port
replicator could cause a temporary loss of power.
1.
Turn off your computer and disconnect all peripherals.
2.
On the bottom of the computer, slide the port replicator connector cover
open.
Port replicator connector
3.
Attach the bottom of the computer to the port replicator connector until it
clicks.
Notebook
4. Plug the cable attached to the AC adapter into the
port replicator. Plug the power cord into the AC adapter and an AC outlet.
Connecting the Port Replicator
Port replicator
DC IN
37
connector on the