Using Battery Power - Sony VAIO PCG-F610 User Manual

12
Notebook User Guide

Using Battery Power

You can use a battery pack as a source of power.For more information on
conserving battery life, see "Using Power Saving Modes" on page 32.
The battery pack that comes with your computer is not fully charged at the
time of purchase. Follow the steps below to insert and charge the battery
pack.
To insert the battery pack
1.
Open the cover of the battery bay.
2.
Insert the battery pack into the battery bay on the left side of the
computer.
Battery pack
(supplied)
3. Close the cover of the battery bay until it clicks.
When attaching your computer to the port replicator, do not attempt to insert or
remove the battery pack. Lifting and turning the computer with a port replicator
attached could cause a temporary loss of power.
To charge the battery pack
1. Connect the AC adapter to the computer.
2.
Insert the battery pack.
Label side facing down