Smeg Cortina SF4750VC User Manual page 36

P2: Showroom (for exhibitors only)
This mode allows the appliance to
deactivate all heating elements, while
keeping the control panel active.
To use the appliance normally, set this
mode to OFF.
If this mode is active,
will be shown on the display for 3
seconds every minute.
P3: Eco-Logic
This mode allows the appliance to limit the
power used.
Suitable for simultaneous use with further
home appliances.
HI: normal power.
LO: low power.
Activating eco-logic mode means
that preheating and cooking times
may be extended.
90
Use
P4: Keep Warm
This mode allows the appliance to keep
cooked food warm (at low temperatures)
for around an hour after cooking finishes
with a cooking cycle for which a duration
has been set (if this is not manually
interrupted).
If this mode is active, the message
display at the end of traditional cooking
P5: Water hardness
The appliance is factory set for
water of medium hardness.
This mode allows you to set the water
hardness value in order to optimise the
descaling process.
It is possible to modify the water hardness
setting from a minimum of
a maximum of
Request information on the
hardness of your water from your
local water board.
If your mains water supply is too
hard, we recommend
using a water softener.
will appear on the
.
to
.