Table of Contents
Advertisement
DRIVING
CRUISE CONTROL/SMART CRUISE CONTROL
1
2
3
4
Setting Vehicle Distance (Smart Cruise Control only)
The system assists you in setting the distance
from the vehicle ahead and will maintain the
2
selected distance without having to press on
the accelerator or the brake pedal.
The vehicle-to-vehicle distance
automatically activate when you set the
cruise speed
1
Each time the button is pressed, the vehicle-
to-vehicle distance changes as follows:
Setting Cruise Control
1. Press the "CRUISE" button
to turn on Cruise Control. The icon will
1
illuminate in the instrument cluster.
2. Toggle "-SET" switch (3) DOWN to set cruising speed.
Adjusting the vehicle speed
1. Toggle "+RES" switch
UP to increase cruising speed.
2
2. Toggle "-SET" switch
DOWN to decrease cruising speed.
3
Note
Quick toggle up/down will change speed by 1 mph. Holding
switch up/down will change speed by 10 mph.
To Cancel Cruise Control
Press the "CANCEL" button
or depress the brake pedal.
4
42
The Cruise Control system allows
you to program the vehicle to
maintain a constant speed without
pressing the accelerator pedal.
Push CRUISE button to turn cruise
1
control ON/OFF.
Push the toggle switch UP to resume
2
or increase cruise control speed.
Push the toggle switch DOWN to set or
3
decrease the cruise control speed.
Push CANCEL to cancel cruise control.
4
will
1
.
2
Distance 3
(Default Setting)
Distance 1
Distance 2
HYUNDAI
REARVIEW CAMERA
Rearview display
When the gear shift lever is shifted into reverse (R), the rearview camera
displays the area behind the vehicle.
NOTE
The image displayed on the screen may become difficult to see under the
following conditions:
- In the dark or at night.
- When it is raining, or when water droplets are on the camera.
- When the sun or the beam of headlights are shining into the camera lens.
Use care to keep the camera lens clean and avoid applying any type of
solvents, car wax, or window cleaners to the camera lens.
If the lens becomes dirty, wipe the lens with a clean, soft cloth.
VELOSTER
The rearview camera
will activate when
the ignition switch is
ON and the shift lever
is in the R (Reverse)
position.
43
Advertisement
Table of Contents
