Table of Contents
Advertisement
DRIVING
-
PADDLE SHIFTER
-
Press (-) to
downshift
The paddle shifter is available when the shift lever is in the D (Drive) or
S (Sport) position, or the manual shift mode.
It will operate when the vehicle speed is more than 3mph.
Pull the [+] or [-] paddle shifter once to shift up or down one gear.
NOTE:
When in ECO mode, the paddle shifter will adjust
regenerative braking when in D (drive).
COASTING GUIDE
Coasting
Coasting
Coasting
Coasting
Type A
Type B
45
I Quick Reference Guide
Press (+) to
upshift
Vehicle with factory installed
navigation system:
After an address is inputted and
navigation is in progress, the coasting
guide informs the driver when to take
the foot off from the accelerator by
anticipating a decelerating event
based on the analysis of driving routes
and road conditions of the navigation.
This helps increase fuel efficiency by
allowing coasting down the road with
EV motor only.
To activate the system, select
"User Settings
Driving Assist
Coasting Guide".
The driving speed should be
between 25 mph and 100 mph.
HYUNDAI
CRUISE CONTROL / SMART CRUISE CONTROL
1
2
3
4
2
1
Setting Cruise Control
1. Press the "CRUISE" button
to turn on Cruise Control. The icon will
1
illuminate in the instrument cluster.
2. Toggle "-SET" switch (3) DOWN to set cruising speed.
Adjusting the vehicle speed
1. Toggle "+RES" switch
UP to increase cruising speed.
2
2. Toggle "-SET" switch
DOWN to decrease cruising speed.
3
NOTE:
Quick toggle up/down will change speed by 1 mph. Holding
switch up/down will change speed by 5 mph.
To Cancel Cruise Control
Press the "CANCEL" button
or depress the brake pedal.
4
IONIQ plug-in
The Cruise Control system allows you to
program the vehicle to maintain a
constant speed without depressing the
accelerator pedal.
To turn On/Off cruise control.
1
Toggle switch UP to Resume or
2
Increase the cruise control speed.
Toggle switch DOWN to Set or
3
Decrease the cruise control speed.
To Cancel the Cruise Control.
4
Setting Vehicle Distance (Smart
Cruise Control only)
Press the button to set and
maintain the vehicle-to-vehicle
distance without pressing the
accelerator or brake pedal.
The vehicle-to-vehicle distance
will automatically activate when
you set the cruise speed
.
2
Each time the button is pressed,
the vehicle-to-vehicle distance
changes as follows:
Distance 4
Distance 3
Distance 2
(Longest)
Distance 1
(Shortest)
Quick Reference Guide I
1
46
Advertisement
Table of Contents
