Honeywell RDWL515A2000 Installation And Operation Manual page 6

Connect a Push Button
Follow these steps to change the ring and halo light color for an existing
doorbell, too.
1. Press and hold the Setting button
on the doorbell for three seconds.
The halo light will circle.
2. Press the push button.
3. Within 12 seconds of pressing
the push button, press the Music
button to select the ring for that
push button.
4. Within 12 seconds of pressing the
push button, press the Sunlight
button to select a halo light color
for that push button.
Secret Knock
You can set up a Secret Knock that makes a different ring and halo light color
for each push button. The Secret Knock is triggered by pressing the push
button quickly 3 times.
1. Press the push button 3 times quickly.
2. Within 12 seconds of pressing the push button, press the Music button to
select the ring for the Secret Knock.
3. Within 12 seconds of pressing the push button, press the Sunlight button
to select a halo light color for the Secret Knock.
6