Swc; File Explorer; Aux-In - Blaupunkt Jamaica 970 Operating Instructions Manual

SWC (Steering wheel control)
Steering wheel control allows you up to 8 functions
depending upon the number of control buttons in the
speci c vehicle the device is being installed that can be
operated via existing steering wheel-mounted
controls. This requires assigning the desired function to
the buttons on the SWC.
Note: The SWC function operates with analog control
signals, depending on the vehicle type an additional
interface may be required.
Select the SWC icon form the main interface
Ÿ
Assign the desired function up to 8 placeholders
Ÿ
(Select any from 1 to 8)
The assigned placeholder is identi ed by the check
Ÿ
mark and the selected function is identi ed by
placeholder number
Repeat the steps to assign the additional function to
Ÿ
the SWC controls
Thereafter assign the relevant placeholders to the
Ÿ
buttons of steering wheel-mounted controls
Tap on 'Begin Learn' to start
Ÿ
Placeholder 1 and the assigned function are
Ÿ
displayed
Press any button of the steering remote control for
Ÿ
approximately 1 second
The displayed function is assigned to the button
Ÿ
being pressed
²
Tap on the to assign the next function
Ÿ
You can tap the ± to return to a previous function
Ÿ
and reassign if needed.

File Explorer

The 'File Explorer' icon on the main interface allows you
to browse the content of your les used on the device
The 'Classify' tab can help you quickly identify the les
you are looking for based on its classi cation. The
options available range from Apk, Image, Video, music
or any other type.
When you tap on the 'sd card' tab you get to see
content from the different folders you have. Select the
desired folder to access your les.
AUX in
Connect the video RCA to video input socket and the
audio RCA's (L+R) to the audio input RCA's, tap the icon
[AUX-IN] in the main interface to enter AUX-IN
interface.
Warning: Do not watch Video while driving
SWC | File Explorer | AUX-in
AUX in Icon
17