Configuring Raid; Procedure; Installing A Windows Os - H3C UniServer R6900 G3 Operating System Installation Manual

3. Press F4 to save the configuration and reboot the server.

Configuring RAID

For more information, see H3C Server Storage Controller User Guide.

Procedure

Installing a Windows OS

The installation procedure is the same for different Windows OS versions. This section uses
Windows Server 2012 R2 as an example.
A Windows OS cannot be installed on a dual SD card.
To install a Windows OS:
1. Enter BIOS and select boot options:
For H3C UniServer R4900/4700/2900/2700 G3, enter the BIOS Setup Utility, select a boot
option in the Save & Exit tab, and then press Enter. This example selects UEFI:AMI
Virtual CDROM0 1.00.
Figure 17 Selecting a boot option
For H3C UniServer R6900 G3, enter the Front Page, in the Boot Manager, select a boot
option, and then press Enter. This example selects EFI USB Device(AMI Virtual
CDROM0.
13