Sony SU-W210 Instructions Manual page 6

Step 4: Attach bracket B to the TV
Before attaching bracket B, remove the rear cover of the TV and disconnect all
the cables from the TV.
For how to remove the rear cover of the TV, refer to the Operating Instructions
supplied with the TV.
(The illustrations used in this manual show the KLV-21SR2/KLV-L23M1 as
examples.)
Remove the screws as shown below, and remove the TV
1
stand from the TV.
To prevent damaging the surface of the LCD display, place the TV on a
soft mat.
Remove the four
screws.
Rear of the TV
Soft mat
Notes
• Place the TV body only on the table as shown above. If the TV stand is also on the
table, the TV body may be unstable and cause damage.
• When removing the TV stand, hold it firmly.
Secure bracket B to the TV firmly using the four screws
2
removed in step 1.
6
KLV-21SR2
TV stand
Rear of the TV
KLV-L23M1
Remove the six screws.
(M4 type for bracket
B)
Rear of the TV
Soft mat
To secure bracket B to the TV,
use the screws removed from the
TV stand, not the ones from the
hinge cover.
Bracket B
Remove the two
screws and hinge
cover.
TV stand