Download
Share
Print this page
Sony SU-W210 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. TV Mount
  5. SU-W210
  6. Operating instructions manual
Sony SU-W210 Operating Instructions Manual

Sony SU-W210 Operating Instructions Manual

Wall-mount bracket
Hide thumbs Also See for SU-W210:

Advertisement

Quick Links

Download this manual See also: Instruction Manual
4-095-518-E1 (2)
Wall-Mount Bracket
Operating Instructions
• This Wall-Mount Bracket is designed for use with the Sony KLV-SG21M1
LCD Color TV.
SU-W210
© 2004 Sony Corporation

Advertisement

loading

Related Manuals for Sony SU-W210

Summary of Contents for Sony SU-W210

  • Page 1 4-095-518-E1 (2) Wall-Mount Bracket Operating Instructions • This Wall-Mount Bracket is designed for use with the Sony KLV-SG21M1 LCD Color TV. SU-W210 © 2004 Sony Corporation...
  • Page 2 Thank you for purchasing this product. For Customers Sufficient expertise is required for installing this product, especially to assure the strength of the wall. Be sure to entrust the attachment of this product on the wall (Step 1 to Step 3 in “Installation”) to qualified service personnel and pay adequate attention to safety during the installation.

  • Page 3: Installation

    Caution • This Wall-Mount Bracket is only for the specified Sony LCD Color TVs. Do not use the bracket with a TV whose operating instructions do not specify the use of this bracket. • Be especially careful not to drop the TV when you install it high on a wall.
  • Page 4 Step 2: Decide the installation location Decide the location on the wall to install the TV. Then, place bracket A on the installation location and mark the four screw holes on the wall using a pencil. Before marking the location of the holes, make sure that the distance between the upper edge of bracket A and the ceiling is 15 cm or more, and that between the side edge of bracket A and the side wall is 25 cm or more.
  • Page 5 Step 3: Secure bracket A to the wall Insert four of the screws you prepared at the positions marked in Step 2 (page 4). Do not tighten the screws completely for the moment. Keep a space of 2 to 3 mm from the wall. Wall Screws you prepared...
  • Page 6 Step 4: Attach bracket B to the TV Before attaching bracket B, remove the rear cover of the TV and disconnect all the cables from the TV. See the Operating Instructions for the KLV-SG21M1 for details on detaching the rear cover. Remove the five screws and detach the TV stand from the TV.

  • Page 7: Step 5: Connect The Cables

    Align the four holes on bracket B to the corresponding holes on the rear panel then secure the bracket to the TV using four of the five screws you removed previously. Rear of the TV Bracket B Note Keep the remaininig screw for future use. Use it to secure the stand to the TV again. Step 5: Connect the cables Connect the cables.
  • Page 8 Step 6: Attach brackets C, D, and E to the TV Attach bracket C of the desired angle to bracket B. Insert the hooked part of bracket C into bracket B as illustrated below. Confirm that both sides of bracket C are outside bracket B, and secure them firmly with two of the supplied screws.
  • Page 9 Attach bracket D to bracket C, and secure them firmly with two of the supplied screws. Place bracket D onto bracket C as illustrated below, and secure them with the two screws. Bracket D Attach bracket E to bracket C, and secure them firmly with two of the supplied screws.
  • Page 10 Step 7: Secure the TV to the wall Hook bracket E on bracket A. Bracket A Bracket E Wall Notes • Hold the TV firmly. Be especially careful when you secure the TV in a high place. • Do not release the TV until you confirm that bracket E is firmly secured to bracket A at three locations.
  • Page 11 Insert the locking rod. The locking rod can be inserted from either side. The illustration below shows an example of how to insert the locking rod from the right side. 1 Insert the longer side of the locking rod into the holes on bracket 2 Insert the curved side of the locking rod into the hole on bracket A.
  • Page 12 Detaching the TV from the Wall-Mount Bracket Remove the locking rod from brackets A and E, then detach the TV from the Wall-Mount Bracket. Locking rod...

  • Page 13: Specifications

    Specifications Value varies depending on the angle of bracket C. Bracket C angle 0° 55 mm 5° 63 mm 10° 71 mm 168 mm Bracket mass: Approx. 1.6 kg Supportable weight: Approx. 12 kg Design and specifications are subject to change without notice.
  • Page 16 Printed in China...