Introduction; Location Of Air Conditioner; Mounting The Air Conditioner - Braemar RPA Series Installation, Operation & Service Manual

Installation must be in accordance with Municipal building Regulations,
Relevant Electrical Wiring Regulations, and any other relevant Codes and Regulations

Introduction.

All Braemar air conditioners are run and electrically tested at the factory.
Subject to normal handling during storage, transit, installation and operation, they will provide
years of economical air conditioning with the minimum of service and maintenance.
All Braemar air conditioners are designed for a range of installations and are readily adaptable to
the following applications.
a. Through wall or window mounting for direct discharge through the appropriate air
diffusion equipment
b. Wall mounting for plenum chamber diffusion.
c. Roof (all models), ground or wall mounting for connection of multiple outlet duct systems.
d. Roof (all models), ground or wall mounting for connection to a duct system for central
plenum air diffusion.

Location of Air Conditioner.

To ensure only fresh air flows through the filter pads. locate the cooler away from chimneys,
exhaust/extractor flues, heater flue pipes and sewer vents.
Check your local building code for the minimum distances in your area.
Allow adequate access to and around the cooler for maintenance. Provision must be made for
access to electricity, water supply and drains
Thoroughly seal all roof penetrations, this will ensure storm water cannot enter the building as a
result of the installation
Unit Mounting Guidelines.
Mounting the RPA unit. - A level platform is required for all units and must be strong enough to
support the unit under operating and prevailing conditions.
RPA ROOF MOUNTED TYPE DETAILS
Model Dimension A
RPA 1000-1500
RPA 700-900
RPA 600
RPA 400-500
RPA INDUSTRIAL AIR CONDITIONERS
Dimension B
1940 30 min
1480 30 min
1330 30 min
1055 30 min
Important!
Typical Detail