Oase Bitron C Operating Instructions Manual page 6

Uvc

Hide thumbs Also See for Bitron C:

Table of Contents

- English -

BioSmart

This section describes the connection of the UVC clarifying unit Bitron with a pump fed system.

●

Please adhere to the instructions for use of the flow-through filter.

1. Insert the outlets with flat seals through the holes in the container wall.

2. Fitting the inlet: Screw the inlet nozzles with the O rings onto the outlets and hand tighten.

3. Closing the bypass (optional): Screw the cover cap onto the outlet instead of the inlet nozzle.

4. Connect the Bitron to the filter pump. (See Connecting the inlet)

BioTec ScreenMatic

●

Please adhere to the instructions for use of the flow-through filter.

1. Insert the outlets with flat seals through the holes in the container wall into the distributor.

2. Screw the distributor nuts with the O rings onto the outlets and hand tighten.

3. Connect the Bitron to the filter pump. (See Connecting the inlet).

BTN0037

BTN0040

BTN0041

Table of Contents

Show Quick Links

Table of Contents

Need help?

Do you have a question about the Bitron C and is the answer not in the manual?

Bitron c uvc