Installation Operation and Maintenance Instructions Contents Service Intro Troubleshooting Warranty Safety Obtaining Service Safety and Warning Disposal and Recycling Installation Environmental Requirements Electrical Cutout Dimensions Product Dimensions Water Hookup General Installation Overlay Panel Dimensions Overlay Panel Installation Grille Installation Door Swing Door Adjust Operating Instructions First Use...
Page 3
The information in this guide is intended to help you install and maintain your new Marvel crescent ice maker to protect and prolong the lifetime of your unit. We encourage you to contact our Technical Support team at (800) 223-3900 with any questions.
Installation Operation and Maintenance Instructions Safety and Warning Disposal and Recycling DANGER NOTICE Please read all instructions before installing, operating, or RISK OF CHILD ENTRAPMENT. Before you throw away servicing the appliance. your old refrigerator or freezer, take off the doors and leave shelves in place so children may not easily climb inside.
Cutout Dimensions PREPARE SITE WARNING Your Marvel has been designed for either free-standing or built-in installation. When built-in, your unit does not require SHOCK HAZARD — Electrical Grounding Required. Never additional air space for top, sides, or rear. However, the...
Installation Operation and Maintenance Instructions Water Hookup CAUTION PREPARE PLUMBING Do not use any plastic water supply line. The line is under The water valve uses a standard 1/4" (6.35 mm) pressure at all times. Plastic may crack or rupture with compression fitting.
Installation Operation and Maintenance Instructions General Installation 3. Locate water valve in the front of LEVELING INFORMATION the unit and thread water supply line NOTICE through. Because these units do not have leveling legs, it is extremely important that they sit on a level surface. If they are not level, the ice mold will not fill evenly.
Installation Operation and Maintenance Instructions Door Swing Grille Installation REMOVING AND INSTALLING GRILLE Wall 2-1/8" Min. (54 mm) WARNING Disconnect electric power to the unit before removing the grille. When using the unit, the grille must be installed. Removing the grille 1.
Installation Operation and Maintenance Instructions Door Adjust Bottom Reversible CHECKING DOOR ALIGNMENT Hinge Top Hinge The unit’s door is aligned at the factory before shipment. However, its alignment could have been disturbed during shipment. Pivot Screw Right Side Left Side Door Swing Door Swing NOTICE...
Page 11
Installation Operation and Maintenance Instructions 5. Remove bottom hinge from cabinet (two screws). 9. Use the 3 screws to attach hinge to top of cabinet— Replace screws in cabinet. long, straight edge of hinge should align to the outside edge of cabinet. Do not tighten screws. 6.
(see above). Failure to raise the bin arm may result in damage to the water valve. NOTICE Marvel recommends discarding the ice produced Certain sounds are normal during the unit’s operation. You during the first two to three hours of operation to avoid...
Installation Operation and Maintenance Instructions ICE MAKER ADJUSTMENT 3. Turn the adjusting screw toward the minus (-) sign (clockwise) for smaller cubes or toward the plus (+) sign Ice Cube Thickness Adjustment (counterclockwise) for larger cubes. Interval - As Required On ice maker equipped models, adjust the cube size by 4.
Installation Operation and Maintenance Instructions Cleaning EXTERIOR CLEANING If any surface discoloring or rusting appears, clean it quickly ® ® with Bon-Ami or Barkeepers Friend Cleanser and a Black Models nonabrasive cloth. Always clean with the grain. Always finish Clean surfaces with a mild detergent and warm water ®...
Installation Operation and Maintenance Instructions Cleaning Condenser DEFROSTING Manual Defrost Models INTERVAL - EVERY SIX MONTHS This unit is a manual defrost model and will require To maintain operational efficiency, keep the front grille free of occasional defrosting. When there is build-up of dust and lint, and clean the condenser when necessary.
Installation Operation and Maintenance Instructions Extended Non-Use VACATION/HOLIDAY, PROLONGED SHUTDOWN For questions regarding extended non-use, please call Marvel at 800.223.3900. The following steps are recommended for periods of extended non-use or if the unit will be exposed to temperatures of 40°F (5°C) or less: CAUTION 1.
Installation Operation and Maintenance Instructions Troubleshooting BEFORE CALLING FOR SERVICE TROUBLESHOOTING GUIDE If you think your Marvel product is malfunctioning, read the DANGER CONTROL OPERATION section to clearly understand the function of the control. ELECTROCUTION HAZARD. Never attempt to repair or...
Page 18
1-YEAR LIMITED PARTS AND LABOR WARRANTY For one year from the date of original purchase, this Marvel product warranty covers all parts and labor to repair or replace any part of the product that proves to be defective in materials or workmanship. For products installed and used for normal residential use, material cosmetic defects are included in this warranty, with coverage limited to 60 days from the date of original purchase.
Page 19
800.223.3900 for directions on how to obtain warranty coverage in your area. • If the product is outside the first year warranty period, Marvel Customer Service can provide recommendations of service centers in your area. A listing of authorized service centers is also available at www.marvelrefrigeration.com under the...
Page 20
www.marvelrefrigeration.com 1260 E. VanDeinse St. Greenville, MI 48838 800.223.3900 05/10/19 30605 Rev_C...
Need help?
Do you have a question about the MA14CRSCXS and is the answer not in the manual?
Questions and answers