Sony BVP-9500WSP Operation Manual page 49

To adjust the skin detail level
1
Set the cursor to Level by turning the MIC 1
LEVEL control, then press the control.
The figure starts blinking.
2
Adjust the level by turning the MIC 1 LEVEL
control.
3
Press the MIC 1 LEVEL control.
The figure stops blinking and the adjustment is
completed.
To adjust the skin detail saturation
1
Set the cursor to Saturation by turning the MIC 1
LEVEL control, then press the control.
The figure starts blinking.
2
Adjust the saturation by turning the MIC 1 LEVEL
control.
3
Press the MIC 1 LEVEL control.
The figure stops blinking and the adjustment is
completed.
To adjust the skin detail phase
1
Set the cursor to Phase by turning the MIC 1
LEVEL control, then press the control.
The figure starts blinking.
2
Adjust the phase by turning the MIC 1 LEVEL
control.
3
Press the MIC 1 LEVEL control.
The figure stops blinking and the adjustment is
completed.
To adjust the skin detail width
1
Set the cursor to Width by turning the MIC 1
LEVEL control, then press the control.
The figure starts blinking.
2
Adjust the width by turning the MIC 1 LEVEL
control.
3
Press the MIC 1 LEVEL control.
The figure stops blinking and the adjustment is
completed.
To turn on/off the skin tone detail function
1
Set the cursor to Skin Detail by turning the MIC 1
LEVEL control.
The current status (ON or OFF) starts blinking.
2
Press the MIC 1 LEVEL control.
Each press on the control selects ON or OFF in
turn.
To turn on/off the skin tone detail gate
function
1
Set the cursor to Skin Detail Gate by turning the
MIC 1 LEVEL control.
The current status (ON or OFF) starts blinking.
2
Press the MIC 1 LEVEL control.
Each press on the control selects ON or OFF in
turn.
When the adjustments are completed
Press the ENTER/CANCEL switch downward to
CANCEL to return to the Operation menu.
17(E)