Sony BVP-9500WSP Operation Manual page 43

Character Display
The BVP-9500WS/9500WSP video camera system
shows the operating conditions, adjustment items,
adjusted values, etc. on the viewfinder screen with
characters.
MIC 1 LEVEL control
In the switch box
VTR
STBY
SAVE
ENTER
SEL CANCEL
ENTER/CANCEL switch
DISPLAY switch
Side panel of the BVP-9500WS/9500WSP
Displaying the character data on the
viewfinder screen
Set the DISPLAY switch in the switch box of the
BVP-9500WS/9500WSP to ON.
Automatic adjustment items and adjusted values, and
the items that are set to ON on the VF Setup 1 display
appear.
When the automatic adjustments finishes normally,
"Completed" appears. If an error message appears, see
"Error Messages," and take appropriate actions.
0dB
Auto Black Balance
Black Set R
Completed
GAIN OUTPUT AUTO WHITE
KNEE
CAM
L ON B
M A
H PRE
BARS OFF SET
DISPLAY TESTOUT
ON ENC
OFF RGB
MENU SEL
0dB EVS 1/100 OFF
z0 ND:1 F:3.6 Ex
Turning the character display OFF
Set the DISPLAY switch in the switch box to OFF.
TEMP display
If the temperature around the camera is high, the
internal temperature of the camera may rise to the
upper limit of its operational range, and "TEMP" will
appear on the screen. Then take appropriate action to
reduce the internal temperature of the camera.
If the internal temperature of the camera exceeds the
limit of its operational range during triple-speed
operation, the operation speed is forcibly changed to
normal to protect the internal circuitry. In such a case,
turn the power of the camera OFF, and take
appropriate action to reduce the internal temperature of
the camera. Then restart the camera.
f=180
TEMP
CC:B
ON
11(E)