Operation Menu - Sony BVP-9500WSP Operation Manual

Display on the Viewfinder Screen

Operation Menu

The displays to show the self-diagnosis results or to
set the items or mark displayed on the viewfinder
screen ON or OFF are selected on the Operation Menu.
To display the Operation Menu, set the DISPLAY
switch in the switch box of the BVP-9500WS/
9500WSP to MENU.
Items displayed on the Operation Menu depend on
whether the camera is used in a system or used as a
stand-alone camera. This section describes the items
when the camera is used in a system.
The Operation menu when the camera is used as a stand-
alone camera is described in " Operation Menu for Stand-
Alone Operations."
* Operation Menu *
cDiagnose
Setup 1
Setup 2
Setup 3
9500 Setup
menu sel p enter
1 Diagnosis display
2 VF Setup 1 display
3 VF Setup 2 display
4 VF Setup 3 display
5 BVP-9500WS/9500WSP Setup display
Selecting the screen to be displayed
1
Turn the MIC 1 LEVEL control to move the arrow
to the display you wish to see.
2
Push the MIC 1 LEVEL control.
The display selected in step 1 appears.
12(E)
Self-diagnosis display
The results of self-diagnosis, the connection conditions
with the CCU-900/900P/700A/700AP/550A/550AP
and control equipment, and the elapsed time appear.
VF Setup 1 display
1
2 This menu is for selecting the items to be displayed
3
when the DISPLAY switch is set to ON.
4
5
Setting the items
1
Turn the MIC 1 LEVEL control to move the arrow
to the desired item.
2
Push the MIC 1 LEVEL control to change the
setting, ON/LMT/OFF.
ON: To display
LMT: To display for about three seconds when the
OFF: To not display
* Diagnosis *
AD:-- OHB:--
PR:-- VA:--
DA:-- AT:--
EN:--
[CA-950]
DA:-- CCU:--
IF:-- RM:NC
AU:-- 30H
SDI:--
DPR:--
TX:--
1 Connection with the CCU
2 Connection with the control unit
3 Elapsed time
* VF Setup 1 *
cMaster gain Ind. :ON
Shutter Ind. :ON
Zoom posi. Ind. :ON
Filter Posi Ind. :ON
F No. Ind. :ON
Extender Ind. :ON
Ret No. Ind. :ON
Field Rate Ind. :ON
Incom Mic Ind. :ON
1 Master-gain setting
2 Shutter-speed setting
3 Zoom-position indication
4 Filter selection
5 Aperture setting
6 Use of an extender
7 Return video number
8 Field rate
9 Intercom microphone switch
conditions are changed
1
2
3
1
2
3
4
5
6
7
8
9