Advertisement
© by WilTec Wildanger Technik GmbH
http://www.wiltec.de
http://www.aoyue.eu
http://www.teichtip.de
6. Unfold the right and left sideplate to 90°.
7. Carefully lift the front baseplate, open the right and left
sideplates from the inside outwards, flatten the front worktop.
8. Push down the narrow front cover plate (covering of the
working surface), fixate it on the right and left side of the
chamber. At the same time connect the four notches of the
upper plate with the buttons sticking out of the side parts.
9. The right and left sideplates can be placed vertically or
taken out. By removing one of them a second chamber can
be added and the working surface is doubled.
Seite 21
Advertisement
