Download Print this page

WilTec E420 Operation Manual page 12

Airbrush-spray booth compressor suction unit

Advertisement

Warnings and safety instructions
Please read the operation manual thoroughly before using the unit for the first time; it contains im-
portant information about the unit's correct operation.
The warranty/guarantee is no longer valid if the device suffered a damage that resulted from
non-compliance with the safety regulations and the operating instructions. No liability or re-
sponsibility is assumed for subsequent damage!
Furthermore, we exclude any liability for personal injury or damage to property caused by im-
proper use or disregard for safety regulations! In such cases the warranty/guarantee is can-
celled.
The unauthorised modification, change or disassembling of the device is for safety reasons
not allowed.
The device is not a toy and must be stored out of reach of childr
when children are present.
The device is designed for use in dry interiors (no bathrooms or similar damp rooms). Other-
wise there is danger of deadly electric shock.
Do not expose the unit or its related equipment to damp, extremely high or low temperatures.
Do not leave its packaging unattended because children can play with it and injure them-
selves.
Throwing or dropping the device as well as pressure or tractive forces can lead to the impair-
ment and disruption of the unit's functions.
Do not ever place the unit in the proximity of easily inflammable material, like drapes or cur-
tains.
Always make sure that the rotating disk, on which the object you work on is placed, is posi-
tioned in the middle of the housing chamber!
The unit should remain switched on after each use for 2 - 6 minutes, because the self-cleaning
of the device is carried out.
Switch off the device and disconnect the plug from the socket, if the spray booth is not in use!
If the filter is filthy with a considerable amount of colour/paint, it can no longer work efficiently
and has to be replaced with a clean filter.
To avoid damage to health do not ever use toxic paints, flammable or explosive colour/paints
and materials!
Make sure you have adequate ventilation!
In industrial facilities one must comply with the accident prevention regulations of the employ-
ers' liability insurance association for electrical installation and equipment.
In schools, education and training facilities as well as in do-it-yourself repair shops and hobby
workshops the use of the equipment must be monitored by trained personnel in a responsible
.
manner
If you have any reason to believe that a safe operation is not possible anymore disconnect the
device from the electric system and secure it against unintentional operation.
It can be assumed that a danger-free operation is not possible anymore if:
the device exhibits visible indication of damage,
the device does not function anymore,
the device was stored for a long time under bad conditions
the device was exposed to heavy wear and tough conditions while transported.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.de
http://www.aoyue.eu
http://www.teichtip.de
en
. Great caution is required
Seite 27

Advertisement

loading

Related Products for WilTec E420