Table of Contents
Advertisement
CONNECTING AND DISCONNECTING THE AURA™ ANTENNA
To connect the AURA™ Antenna to the AURA™ Monitor, align the arrows on
the cable and connector (Figure 10) and until they click together (Figure 11).
To disconnect the AURA
pull the cable. Pulling on the cable may damage it in a way that is not visibly
detectable.
Figure 10: Align the arrow markings on the antenna cable and the AURA™ Monitor.
RUNNING IN-PACKAGE CHECK FOR
Before unpacking the AURA
check for the pre-implantation status of the AURA
To run in-package check:
•
Plug the antenna cable into the AURA
•
Turn the AURA
The AURA
TM
Antenna, hold the cable by the plug and pull. Do not
TM
Figure 11: Plug antenna cable into AURA™ Monitor.
Sensor Tray box, the User can run in-package
TM
Monitor on and select the
TM
Monitor will start searching for the AURA
AURA™
SENSOR
Sensor.
TM
Monitor.
TM
button for in-package check.
Sensor.
TM
7
Advertisement
Table of Contents
