Table of Contents
Advertisement
•
Slowly move the AURA
Sensor Tray box (Figure 12). The green light will illuminate on the
antenna when the antenna is at the proper location. Hold the antenna at
this location.
Figure 12: Positioning the AURA
•
If an AURA
AURA
Sensor and show its status.
TM
•
If no AURA
Found." Select the
move the AURA
Sensor within the box may slightly shift during transportation.
persists, please contact Branchpoint Technologies for further instruction.
•
Another option to run in-package check is to remove the sterile pouch from
the AURA
TM
AURA
Sensor visualized through the translucent side of the pouch.
TM
CONNECTING TO AN AURA™ SENSOR
Ensure that an AURA
The device will display the following screen as it seeks an AURA
connect to.
8
Antenna around the marked area on the AURA
TM
Antenna at the sticker on the AURA
TM
Sensor is found, the AURA
TM
Sensor is found, the AURA
TM
button to re-run the in-package check and try to
Antenna around the marked area again as the AURA
TM
Sensor Tray box and position the AURA
Antenna is connected and turn the AURA
TM
Sensor Tray box to run in-package check.
TM
Antenna will connect to the
TM
Monitor will display "No Sensor
TM
Antenna over the
TM
TM
TM
If failure
Monitor on.
TM
Sensor to
TM
Advertisement
Table of Contents
