Sony HT-DDW99 Operating Instructions Manual page 11

Name Function
A AV ?/1
Press to turn on or off the
(on/standby) audio/video components that
the remote is programmed to
operate.
To turn the TV on or off, press
TV (Z) and then press AV
?/1.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (3).
B ?/1
Press to turn the receiver on or
(on/standby) off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
C Input
Press one of the buttons to
buttons
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control
Sony components as follows.
You can program the remote to
control non-Sony components
following the steps in
"Programming the remote" on
page 66.
Button
VIDEO 1
VIDEO 2
VIDEO 3
DVD
SAT
TV
SA-CD/CD Super Audio CD/
TUNER
AUX
DMPORT
Assigned Sony
component
VCR (VTR mode 3)
VCR (VTR mode 2)
VCR (VTR mode 1)
DVD player
Satellite tuner
TV
CD player
Built-in tuner
Not assigned
DIGITAL MEDIA
PORT adapter
Name Function
D RECEIVER
Press to activate the receiver
operation (page 39).
E 2CH
Press to select a sound field
(page 49, 51, 53).
A.F.D.
MOVIE
MUSIC
F D. TUNING
Press to enter direct tuning
mode.
G AUTO CAL
Press to activate the Auto
Calibration function.
H Numeric
Press to
buttons
– preset/tune to preset stations.
a)
(number 5 ) – select track numbers of the
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape deck.
Press 0/10 to select track
number 10.
– select channel numbers of the
VCR, satellite tuner, Blu-ray
disc recorder, PSX, DVD/
VHS COMBO or DVD/HDD
COMBO.
Press TV (Z) and then press
the numeric buttons to select
the TV channels.
I ENTER
Press to enter the value after
selecting a channel, disc or
track using the numeric buttons
of the VCR, CD player, VCD
player, LD player, MD deck,
DAT deck, tape deck, satellite
tuner, Blu-ray disc recorder or
PSX.
To enter the value of Sony TV,
press TV (Z) and then press
ENTER.
MEMORY Press to store a station during
tuner operation.
J DISPLAY
Press to select information
displayed on the TV screen of
the VCR, VCD player, LD
player, DVD player, CD player,
MD deck, Blu-ray disc
recorder, PSX, satellite tuner,
DVD/VHS COMBO or DVD/
HDD COMBO.
To select information of Sony
TV, press TV (Z) and then
press DISPLAY.
continued
11 US