Naming Inputs - Sony HT-DDW99 Operating Instructions Manual

Notes
• You cannot reassign more than one digital audio
inputs to the same input.
• You cannot use the digital audio input for the
original input when it has been assigned to another
input.
• When you reassign the digital audio input, the
INPUT MODE setting may change automatically
(page 59).
• You cannot reassign the digital audio input to
TUNER and DMPORT.

Naming inputs

You can enter a name of up to 8 characters for
inputs and display it on the receiver's display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
3
Press MENU.
"1-LEVEL" appears on the display.
4
Press V/v repeatedly to select
either "5-AUDIO" or "6-VIDEO".
5
or b to enter the
Press
menu.
6
Press V/v to select "NAME IN".
7
Press or b to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
"To create an index name" (page 58).
63 US