1. Outdoor Unit Maintenance Remote Controller
1-2. Functions
Functions on the ordinary display
(1) Press the buttons to execute the following functions.
•
All indoor units stop/start
•
Cooling/heating change
•
All indoor units test run
(2) Display: The following displays are possible.
•
Alarm display
•
No. of indoor/outdoor units
•
Unit Nos. of connected indoor/outdoor units
•
Operating status of indoor/outdoor units (Blinks when alarm occurs.)
•
Indoor thermostat ON
•
Display of individual outdoor unit alarms
•
Total operating time of outdoor unit compressors
•
Oil level of the outdoor unit oil sensor
•
Total outdoor unit power ON time
•
Outdoor unit microcomputer version, other information
Temperature monitor
Displays the temperature from each indoor/outdoor sensor.
Outdoor unit alarm history monitor
Displays the outdoor unit alarm history.
Settings the outdoor unit EEPROM data
Settings mode 1 and settings mode 2 can be used to make outdoor unit EEPROM data settings.
6-3
Mini VRF SYSTEM
Service Checker
6