Table of Contents
Advertisement
Setup
Install Port Cover
Remove the protective body cap from the Nikonos RS mount.
Carefully Position the Port Cover onto Pro Action as shown. Mate the Port Cover
with the Nikonos RS mount.
Once mated, secure the four corner screws securely.
With the protective cap removed from
the Nikonos RS Mount, Port Cover
as shown. Ensure the Port Cover
mates with the Nikonos RS mount.
Tighten the four corner screws
securely.
Page 8
Advertisement
Table of Contents
Need help?
Do you have a question about the Pro Action and is the answer not in the manual?