Operation - Redback 106071 Operation Manual

Operation

Switch the unit off and remove the battery if the unit is left
unattended; before checking, cleaning or performing other work
on the unit; or if the unit starts vibrating excessively.
Before initial operation
Unpack the pole saw and accessories and check that no parts are
missing or damaged.
NOTE: The batteries (optional; depending on delivery scope) are
not fully charged on delivery. Prior to initial operation, charge the
batteries fully. See user manual of the battery charger.
Lubricating the chain
The unit may be operated with adequate chain lubricating oil only.
Inadequate lubrication will reduce the service life of the power
tool. Check the amount of oil on the oil level indicator.
Topping up the chain oil
Fill the oil tank only with an environmentally compatible quality
chain and bar lubricant (according to RAL-UZ48).
• Do not use waste oil. Renewed contact with waste oil can cause
skin cancer.
• Waste oil is environmentally harmful.
• Waste oil does not have the necessary lubricating properties and
is unsuitable for chain lubrication.
• An oil other than the one recommended may damage the rail, the
chain and the lubricating system.
• Ensure that dirt does not get into the oil tank.
• Avoid spilling oil. Always wipe up any spilled oil.
8
!
WARNING
!
CAUTION
!
CAUTION