Operation
Adjustments before using
Before performing any work on the garden
Assembling and adjusting the shoulder belt
• Open retaining hook and hook onto the fastening eye on the
housing (see Figure 4).
• Adjust the shoulder belt to your height. Adjust the shaft length.
To adapt to the working height the shaft length can be varied up
to 17.7 inches (see Figure 5).
• Loosen the threaded sleeve on the shaft coupling 1.
• Extend the lower shaft until the ideal handle length is reached 2.
• Tighten the threaded sleeve 3.
Inserting/replacing the battery
• Charging the battery as described in the battery charger
operation manual.
• Press the charged battery into the power tool until it clicks into
place (see Figure 6).
• To remove, press the release button
Protect the battery contacts when the
battery is not being used. Loose metal parts
may short-circuit the contacts.
10
!
WARNING
tool, remove the battery.
and pull out the battery 2.
1
!
WARNING
Figure 4
Figure 5
Figure 6