Zenner Celsius WMZ compact Installation Instructions

Installation instructions
Heat meter zelsius
Coaxial-Measuring Capsule Heat
Meter for Symmetrical Installation
Qn 2,5 / 1,5 / 0,6 m³/h
Packing list
Measuring capsule zelsius
1
incl. temperature sensors
1 Sealing set
1 Profile seal
eneral Information
T e installation of t e measuring capsule basically takes place in a already
mounted single pipe connection piece (EAS). Please read t
installation instructions
Installation Set WMZ Compact)
T e maximum eating water temperature may not exceed 90 °C.
Before installing, compare t e content of t e package wit t e packing list.
nstalling the Measuring Capsule
efore installing flush system thoroughly,
release or empty pressure and close
valves in front of and behind the EAS (4).
Use only new and flawless sealing
material. Check sealing surfaces on
measuringcapsule and EAS for damage.
Screw out overflow cap (2) or existing
measuringcapsule.
Remove old profile seal and insert new
one (3) into EAS (4) with the flat side up.
Clean the sealing surface beforehand!
Remove the protective cap (1) from the
new measuring capsule (5) and then
screw into the EAS (4).
Tighten measuring capsule up to the
metallic stop with a hook wrench (for
example: according to DIN 1810A, 68-75
mm).
ZENNER GmbH & Co. KGaA; Römerstadt 4; 66121 Saarbrücken; Germany
Tel.: +49 (0) 681 / 99676-0; Fax:
www.zenner.de; info@zenner.de
®
Content
®
according to model
3 x Self-locking seal
3 x Locking wire
(Installation instructions No. 96W006 for t e Zenner
carefully.
+49 (0) 681 / 64394
Order No.
60 W 307
60 A 141
... because every drop of water counts.
e respective
Subject to change, errors excepted!
#
2)
!
"