Ssh Client Configuration Examples; When Using Password Authentication - H3C S5500-EI Series Operation Manual

Operation Manual – SSH
H3C S5500-EI Series Ethernet Switches
Figure 1-10 SSH client configuration interface (2)
From the window shown in
appears. If the connection is normal, you will be prompted to enter the username
(client002) to enter the configuration interface.

1.6 SSH Client Configuration Examples

1.6.1 When Using Password Authentication

I. Network requirements
As shown in
(the SSH server) through the SSH protocol.
The username of the SSH client is client001 and the password is aabbcc.
Password authentication is required.
Figure 1-10, click Open. The following SSH client interface
Figure 1-11, Switch A (the SSH client) needs to log on to Switch B
1-24
Chapter 1 SSH Configuration