Advertisement
Application
Indicator
Installation
Dimensions
2
Building Technologies
Fire safety and security products
– Suitable for use in places where the ambient temperature can change rapidly or
smoke detector are not suitable
– Dust cap protects the detector from being contaminated by construction work
The detector is provided with an internal alarm indicator to show its operating status.
Status
Normal
Locate/Test
Alarm
Easy and time-saving mounting
Install the base and finish the wiring during the construction phase.
1. Point the retaining nest to the positioning pointer and insert it into the base.
2. Turn it clock wisely until it stops.
Uninstallation:
1. Turn it counterclockwisely until it stops.
2. Pull the detector out.
Base
Positioning pointer
Detector
Retaining nest
After all the construction is finished, the dust cap must be taken away!
In：mm（with base）
Indicator
Off
Flashing when connected with FC1840-A3 (for Russian).
Flashing
Steady on
A6V10326261_d_en_--
07.2012
Advertisement
