Function For Conversion Of Video Signals - Sony 3-299-270-21(2) Operating Instructions Manual

Function for Conversion of Video Signals

The subwoofer is equipped with a function for converting video signals.
Video signals and component video signals can be output as HDMI video signals and these up-
converted video signals can only be output from the HDMI TV OUT jack. See the illustration that
follows.
In the video input/output conversion table of the subwoofer
Bottom of the
subwoofer
OUTPUT jack
HDMI TV OUT
INPUT jack
HDMI IN A
VIDEO IN B
COMPONENT
VIDEO IN C
: Video signals are up-converted and output through the video converter.
a : The same type of signal as that of the input signal is output. Video signals are not up-converted.
X : Video signals are not output.
Notes on converting video signals
• When video signals from a VCR, etc., are converted on the subwoofer and then output to your TV,
depending on the status of the video signal output, the image on the TV screen may appear distorted
horizontally, or no image may be output.
• HDMI video signals cannot be converted to component video signals.
• The up-converted video signals are output only from the HDMI OUT jack. They are not output from
any other video jacks.
• When you play back a VCR with an image improvement circuit, such as TBC, the images may be
distorted or may not be output. In this case, set the image improvement circuit function to off.
Input signals
A
BD IN DVD IN SAT IN TV OUT
IR REMOTE ANTENNA
FM
75
IR IN IR OUT1 IR OUT2
COAXIAL
DMPORT ECM-AC2 IR-R100
OPTICAL ASSIGNABLE
DC 5V
0.7A MAX
TV IN DVD IN SAT IN
EZW-T100 DIGITAL
SPEAKER
CENTER FRONT R
COMPONENT VIDEO
MONITOR OUT
a X
X
a
B C
VIDEO
HDMI MONITOR
DVD IN SAT IN
VIDEO IN
OUT
AM
Y
P /
B
L
C
B
COAXIAL
P /
R
R
C
R
SAT IN AUDIO IN
ASSIGNABLE
COMPONENT VIDEO
ONLY FOR SS-IS15
FRONT L SUR R SUR L
Output signals
C
ABC
29
GB