Glossary - Sony 3-299-270-21(2) Operating Instructions Manual

Sony home theatre system operating instructions
Table of Contents

Advertisement

Speakers
Front/Center/Surround (SS-IS15)
Speaker system
Full range speaker system
Speaker unit
35 mm
Rated impedance
10 ohms
Dimensions (approx.)
45 × 55 × 40 mm
(w/h/d)
Mass (approx.)
0.07 kg
Speaker cords
4.5 m × 2, 3 m × 1, 12 m × 2
Subwoofer (SA-WIS100)
Speaker system
2 Way 2 Drivers
Subwoofer speaker system
Speaker unit
120 mm + 160 mm
Rated impedance
4 ohms
Dimensions (approx.)
238 × 441 × 434 mm
(w/h/d)
Mass (approx.)
14.5 kg
Power requirements
220 – 240 V AC, 50/60 Hz
Power consumption
On: 115 W
Standby mode: 0.3W (when “CTRL: HDMI”
and “S-AIR STBY” are set to “OFF.”)
Power output
(DIGITAL MEDIA PORT)DC OUT: 5 V, 700 mA
Remote commander receiver (IR-R100)
Dimensions (approx.)
46 × 19 × 45 mm
(w/h/d)
Mass (approx.)
0.15 kg
Design and specifications are subject to change without
notice.
• Standby power consumption 0.3 W.
• Halogenated flame retardants are not
used in the certain printed wiring
boards.
• Over 85 % power efficiency of
amplifier block is achieved with the
full digital amplifier, S-master.

Glossary

Dolby Digital
This movie theatre sound format is more
advanced than Dolby Surround Pro Logic. In this
format, the surround speakers output stereo
sound with an expanded frequency range, and a
subwoofer channel for deep bass is
independently provided. This format is also
called “5.1” with the subwoofer channel
designed as the 0.1 channel (since it functions
only when a deep bass effect is needed). All six
channels in this format are recorded separately
for superior channel separation. Furthermore,
since all the signals are processed digitally, less
signal degradation occurs.
Dolby Pro Logic II
Dolby Pro Logic II creates five full-bandwidth
output channels from 2 channel sources. This is
done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties of the original recording without
adding any new sounds or tonal colorations.
DTS
Digital audio compression technology
developed by Digital Theater Systems, Inc. This
technology conforms to 5.1-channel surround.
This format comprises of stereo rear channel and
there is discrete subwoofer channel in this
format. DTS provides the same 5.1 discrete
channels of high quality digital audio. The good
channel separation is realized due to the all
channel data being recorded discretely and
processed in digitally.
HDMI
HDMI (High-Definition Multimedia Interface)
is an interface that supports both video and audio
on a single digital connection, allowing you to
enjoy high quality digital picture and sound. The
HDMI specification supports HDCP (High-
bandwidth Digital Contents Protection), a copy
protection technology that incorporates coding
technology for digital video signals.
continued
continued
77
GB

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht-is100

Table of Contents