Sony MDR-DS1000 Operating Instructions Manual page 13

4
Slide the INPUT SELECT switch to select the component you want to listen to.
INPUT SELECT
Position of switch
DIGITAL
ANALOG
Note
To listen to dual audio (MAIN/SUB) sound sources, connect to the LINE IN jack, and then
select the sound source you want to listen to on the player, TV, or other component.
5
Start playback of the component selected in step 4.
6
Slide the EFFECT switch to select the desired sound field.
CINEMA
Position of switch
OFF
CINEMA
MUSIC
Note
The volume of the headphones may vary, depending on the input signal and the setting of
the EFFECT switch.
DIGITAL ANALOG
Selected sound source
Sound of the component connected to DIGITAL IN jack.
Sound of the component connected to LINE IN jack.
EFFECT
OFF
MUSIC
Sound field and suitable sound source
Normal playback of the headphones.
Produces the kind of surround sound that is found in a typical movie
theatre. Suitable for movie sound sources.
Produces the kind of sound field that would be found in a listening
room with good acoustics. Suitable for music sources.
(Continued)
GB
13
Operation