Table of Contents
Advertisement
Environmental Certification Level: RTCA/DO-160F
Software Certification: RTCA/DO-178B Level C
Complex Logic: RTCA/DO-254 Level C
Installation of the ST3400H in a type-certificated rotorcraft must be
performed in accordance with the Sandel ST3400H Installation Manual,
document number 82046-IM applicable revision.
1.7
Conventions Used In This Manual
The name of a button is placed within square brackets when the button is
described in text. For example, "...press the [VUE] selection button to ..."
This manual uses terms, which should be familiar to aviation-minded
readers, such as "Radar Altitude" and "Magnetic Heading". Terms, which
are specific to the ST3400H, will be placed in the glossary.
1.8
Effectivity, Revision History And Errata
Date: 21-OCT-2010
Applies to: ST3400H Software Version 1.01
ST3400H Pilot's Guide 82046-PG, Revision B1
With the exception of the superseding information contained in this
section, operation of the ST3400H is as described in the ST3400H Pilot's
Guide referenced above.
Revision
B1
22-OCT-2010
B
10-SEP-2010
A
06-AUG-2010
No errata applicable to this release
82046-PG-B1
Revision History
Date
A/R 1147 Updated Section 17
Revised for S/W Version 1.01
Initial Release
ST3400H PILOT'S GUIDE
Comments
Jeppesen Terms and
Conditions
Page 1-3
Advertisement
Table of Contents
