Fujitsu Siemens Computers SKP 3970-2 Series Manual page 27

Operating the drives
Press the Insert/Remove button (1), or press gently against the CD drawer:
Ê
Figure 15: Closing the CD-ROM drawer
The CD drawer closes.
Removing a CD
!
Press the Insert/Remove button.
Ê
The CD drawer opens.
Ê Remove the CD from the CD drawer.
Ê Press the Insert/Remove button, or press gently against the CD drawer.
The CD drawer closes.
i
U41119-J-Z126-1-74
When the status indicator on the CD-ROM drive is lit, this means that the drive is
being accessed. Wait until the status indicator goes dark before pressing the Insert/
Remove button.
If the CD drawer does not open, check whether the CD-ROM drive has been locked
by means of a software command. If this is not the case, it means that the drive is
defective and the CD must be removed manually.
Operating the CD-ROM drive
27