Switching The 3970-2X Skp On And Off - Fujitsu Siemens Computers SKP 3970-2 Series Manual

Operation

3.4 Switching the 3970-2x SKP on and off

Switching the 3970-2x SKP on
Figure 6: Switching on the tower and the rack module
Press the ON/OFF pushbutton (1).
Ê
When the 3970-2x SKP has been switched on, the green status indicator (2) is lit. Immedi-
ately after being switched on, the 3970-2x SKP performs a self-test.
!
The 3970-2x SKP is ready for operation if the SINIX welcome window appears on the
screen. If this window does not appear, something has gone wrong when powering up the
SKP. Restart the powering up procedure. If this also proves unsuccessful, notify the
Customer Service Department.
i
U41119-J-Z126-1-74
If, once the 3970-2x SKP has been switched on, only flickering stripes appear on
the screen, switch the monitor off and notify the Customer Service Department.
Following a power failure, the system powers up again automatically.
Switching the 3970-2x SKP on and off
13