Advertisement
Step 2: Faceplate backing plate installation
2.1. Faceplate backing plate installation AC01322 and AC01332
-
Align the holes in the panel (E) with the outer holes of the brackets (A) and the outer hole of the
brackets (C) and secure with ten screws (B).
2.2. Bottom faceplate backing plate installation AC01321 and AC01333
-
Align the holes in the panel (F) with the inner holes of the brackets (C) and secure with two screws
(B).
Note: If your installation requires the addition of a projection kit AC01323, go to step 3. Otherwise, go
to step 4.
Step 3: Projection kit installation AC01323 / 2" or 4"
For a 4" projection, go directly to step 3.2
3.1. For a 2" projection:
-
Fold each part (G), (H) and (J) on the axis of
the micro joints to separate them into two
2 " section.
-
Discard the top portion (grey) and keep the
bottom portion of each piece to complete
the assembly.
3
Advertisement
