Sony MDR DS5100 Operating Instructions Manual page 6

Rear Panel of the
Digital Surround
Processor
1
3
6 GB
Preparation
1 DIGITAL IN jack (see page 14 for
details)
Connect a DVD player, LD player, or
other digital component (sold separately)
to this jack.
2 ATT (attenuator) switch
Set this switch to 0dB when the volume is
2
too low at analog input. Normally, this
switch should be set to –8dB.
3 LINE INPUT jack (see page 15 for
details)
Connect the audio output jack on audio/
video equipment (sold separately), such
as a video cassette player or TV, to this
jack.
4 DC IN jack
Connect the supplied AC power adapter
to this jack. (Be sure to use the supplied
AC power adapter. Using products with
different plug polarity or other
characteristics can cause a malfunction.)
4