D-Link DCS-3110 Quick Install Manual page 9

Configuring Your Camera with
the Installation Wizard
Click on the D-Link Installation Wizard icon that was created in your Windows
Start menu.
The Installation Wizard will appear and show the MAC address of your
DCS-3110 and an IP Address (which may or may not be correct depending
on what you have your DCS-3110 connected to). If you have a DHCP server
on your network, there will be a valid IP Address displayed here.
Note: A DHCP server is a device that supplies the same IP address.
Click Manual Setup
Enter the admin ID and password.
Note: The default Admin ID is admin with
the password left blank.
Click Next
9 D-Link DCS-3110 Quick Install Guide
Configuration