EarthQuaker Devices Organizer Operation Manual

Download this manual

Enlarged version

<<< Switching >>>

This device is true bypass and uses electronic relay-based switching. Audio will not pass

without power.

<<< Power Requirements >>>

• Current Draw: 81mA

• This device take a standard 9 volt DC power supply with a 2.1mm negative center barrel. We

always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple

isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.

Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter

dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

<<< Tech Specs >>>

• Input Impedance: 1M Ohm

<<< Warranty >>>

This device has a limited lifetime warranty. If it breaks, we will fix it. Should you encounter any

issues, please email info@earthquakerdevices.com.

www.earthquakerdevices.com

• Output Impedance: 500 Ohm

O P E R A T I O N M A N U A L

Page 1 This device has a limited lifetime warranty. If it breaks, we will fix it. Should you encounter any issues, please email info@earthquakerdevices.com. www.earthquakerdevices.com O P E R A T I O N M A N U A L ©2018 EarthQuaker Devices LLC...
Page 2 Not only can the Organizer be used on strings, it has been widely used on everything from vocals and synths to horns and drums. If it makes sound, the Organizer can handle it! The Organizer uses a mix of analog and DSP circuitry with true bypass switching and an all analog dry signal path.