Troubleshooting - Sony Bravia XBR-60LX900 Setup Manual

Additional Information

Troubleshooting

The TV will indicate any problems with the STANDBY indicator flashing in red.
When the STANDBY indicator is flashing
The self-diagnosis function is activated.
1
Count how many times the STANDBY indicator flashes between each three second
break.
For example, the indicator may flash three times, go off for three seconds, then flash again three
times.
2
Press POWER on the TV to turn it off, disconnect the AC power cord, and contact
Sony Customer Support (information provided on the front cover) with how many times
the indicator flashes.
When the STANDBY indicator is not flashing
1
Check the items in the tables below. (Also refer to "Troubleshooting" in the i-Manual.)
2
If the problem persists, contact Sony Customer Support (information provided on the
front cover).
Condition
Picture
There is no picture (screen
is dark) and no sound.
Tiny black dots and/or
bright dots appear on the
screen.
General
The TV's power cannot be
turned on.
The TV turns off
automatically (the TV
enters standby mode).
The remote does not
function.
The TV and its surrounding
become warm.
The Parental Lock
password has been
forgotten.
20
Explanation/Solution
• Check the antenna/cable connection.
• Connect the TV to the AC power, and press POWER on the TV.
• If the STANDBY indicator lights up in red, press TV POWER
on the remote control.
• The screen is composed of pixels. Tiny black dots and/or bright
dots (pixels) on the screen do not indicate a malfunction.
• Check to see the (z) mark on the ENERGY SAVING SWITCH
is pressed.
• Check if the Sleep Timer, Timer, or Idle TV Standby is
activated.
• The Auto Shut-off function may be set to On. If Auto
Shut-off is activated and TV receives no signal, the TV will
automatically enter standby mode in 15 minutes. Check Auto
Shut-off is activated under Eco feature of this TV.
• Check if Presence Sensor in Eco is activated.
• Replace the batteries.
• Your TV may be in SYNC mode. Press SYNC MENU, select TV
Control and then select Home (Menu) or Options to control
the TV.
• When the TV is used for an extended period of time, the TV and
its surround may become warm to touch. This is not malfunction
of the TV.
• Enter 4357 for the PIN code. (PIN code 4357 is always accepted.)