Can Method, 1 Master And 2 Remotes; Can Method, 2 Masters And 2 Remotes - Idex Class 1 ITL 40 Operation Manual

FORM-ENG-0018 REV A 05-27-03
607 NW 27th Ave
PRODUCT GROUP
Ocala, FL 34475
Ph: 352-629-5020 or 1-800-533-3569
Fax : 352-629-2902 or 1-800-520-3473
PRODUCT
6.3.3.

CAN method, 1 MASTER and 2 REMOTES

System configured with CAN communication method.
address 1) communicating with 2 REMOTE displays (configured with address 1).
Two CAN terminating resistors (p/n DT06-3S-P006) are required in the system (one at each end of the CAN bus).
6.3.4.

CAN method, 2 MASTERS and 2 REMOTES

System configured with CAN communication method.
with address 1 and address 2) communicating with 2 REMOTE displays (configured with address 1 and address 2).
REMOTE display address 1 only follows the indications of MASTER display address 1, and REMOTE display
address 2 only follows the indications of MASTER display address 2.
Two CAN terminating resistors (p/n DT06-3S-P006) are required in the system (one at each end of the CAN bus).
MANUAL P/N:118253
S U I T A B L E F O R E X T E R N A L D I S T R I B U T I O N
OPERATION MANUAL
ITL40 P/N
Intelli-Tank Level 40
118404-XX
This example shows one MASTER display (configured with
This example shows two MASTER displays (configured
22 of 27
PAGE
DATE 6/12/2019
REV 1.30
BY AMS
P : 6/12/19
RINTED