Sony WEGA KLV S15G10 Operating Instructions Manual page 29

KLV-S20G10
Notes on Using This Connection
To Do This ...
Watch the DVD player
Set up the remote control to
operate the DVD player
Activate the remote control to
operate the DVD player
Control DVD functions with the
remote control
Label video inputs to easily
identify equipment connected to
the TV
AUDIO-L (white)
AUDIO-R (red)
Audio cable
DVD Player
Component video cable
Do This ...
Press TV/VIDEO repeatedly to select the DVD player input or Video 4. (For KLV-
S15G10 model, select Video 3.)
If you have a non-Sony DVD player, you must program the remote control. See
"Programming the Remote Control" on page 34.
Press VCR/DVD (FUNCTION).
See "Operating a DVD Player" on page 36.
See the instructions for setting up Label Video Inputs on page 51.
To connect a DVD player with S VIDEO and audio connectors
If your DVD player does not have component video (YP
component video inputs are already connected to another device, use this
connection.
1
Use an S VIDEO cable to connect the DVD player's S VIDEO output
jack to the TV's S VIDEO input jack (VIDEO 1 IN).
2
Use an audio cable to connect the DVD player's AUDIO output jacks to
the TV's AUDIO input jacks (VIDEO 1 IN).
If your DVD player is not equipped with S VIDEO, use a VIDEO
cable (yellow) instead of the S VIDEO cable.
Connecting the TV
Rear of TV
VIDEO 4 IN (480p/480i) VIDEO 3 IN
R-AUDIO-L
R-AUDIO-L (MONO)
P P Y
R B
R-AUDIO-L
(MONO)
VIDEO 1 IN
Y
P
B
P
R
P ) jacks, or the
B R
VIDEO
VIDEO S VIDEO
29