Installing and Connecting the TV
Connecting a Digital Satellite Receiver with DVI-
HDTV connector
20
Disconnect all power sources before making any connections.
1
Using a DVI-D single link cable, connect the Digital Satellite
Receiver's DVI-HDTV connector to the TV's DVI-HDTV connector.
Use the VIDEO 4 IN connections.
Note
The DVI-HDTV VIDEO connector does not provide audio, so audio cables must be
connected to provide sound.
2
Using an AUDIO cable, connect the Digital Satellite Receiver's
AUDIO OUT jacks to the TV's AUDIO IN jacks.
Rear of TV
Digital Satellite Receiver
(e.g. SAT-HD200, SAT-HD300, etc.)
VIDEO OUT
S VIDEO
OUT
AUDIO-L (white)
OPTICAL
AUDIO-R (red)
AUDIO cable
(not supplied)
DVI-D single link cable
(not supplied)
COMPONENT OUT
DATA
V OUT
Pb
TYPE
Pr