Connecting A Digital Satellite Receiver With Hdmi Connector - Sony WEGA KLV 23M1 Operating Instructions Manual

Connecting a Digital Satellite Receiver with HDMI
Connector
34
Use this hookup if:
• Your Digital Satellite Receiver has a High-Definition Multimedia Interface
(HDMI).
Disconnect all power sources before making any connections.
Using an HDMI cable (not supplied), connect the Digital Satellite Receiver's
HDMI OUT connector to the TV's HDMI IN connector.
Use the HDMI 4 IN connection.
Tips
• The HDMI connector provides both video and audio signals, so it is not necessary to
connect the audio cable.
• Use VIDEO 4 on the remote control to select HDMI 4 IN to watch the digital satellite
receiver input.
Rear of TV
Digital Satellite Receiver
HDMI cable (not supplied)