Sony KZ-32TS1E Operating Instructions Manual page 34

Problem
Poor or no picture (screen is dark), but
good sound.
Noisy picture when viewing a TV
channel.
Distorted picture when changing
programmes or selecting teletext.
Wrong characters appear when viewing
teletext.
No unscrambling or unstable picture
whilst viewing a scrambled channels
with a decorder connected through the
Scart connector
No sound/Noisy sound.
Good picture, no sound.
Audio noise.
Cannot operate the menu.
Strange sound.
The TV cabinet creaks.
The TV whirs.
The TV ticks.
The TV buzzes.
Remote control does not function.
/
The (standby/sleep) indicator on
the TV flashes.
If you continue to experience problems, have your TV serviced by qualified personnel.
Never open the casing yourself.
34
Additional Information
Possible remedies
• Using the menu system, select the "Picture Adjustment"
• Using the menu system, select the "Manual Programme
• Using the menu system, set the "NR" (Noise Reduction)
• Turn off any equipment connected to the Scart connector
• Using the menu system, enter to the "Language/Country"
• Using the menu system, select the "Features" menu. Then
3/
.
S
• Press the
• Check that "TV Speakers" is set to "On" in the "Features"
• Check that headphones are not connected.
• Make sure that the aerial is connected using the supplied
• Keep the aerial cable away from other connecting cords.
• Do not use 300-ohm twin lead cables as interference may
• If the item you want to select appears in a pale colour, you
• Changes in room temperature sometimes causes the TV
• The TV's fan setting is working. This does not indicate a
• An electrical circuit inside the TV is activated when the TV
• There might be a surge sound when turning on the TV. This
• Check that the Media Selector on the remote control is set
• If the remote control does not operate the VCR or DVD
• Replace the batteries.
• Contact your nearest Sony service centre.
menu and select "Reset" to return to the factory settings
(page 14).
Preset" option in the "Set Up" menu and adjust Fine
Tuning (AFT) to obtain better picture reception (page 23).
option in the "Picture Adjustment" menu to reduce the
noise in the picture (page 14).
on the rear of the TV.
option in the "Set Up" menu and select the country in
which you operate the TV set (page 21). For Cyrillic
languages, we recommend to select Russia country in the
case that your own country does not appear in the list.
set "AV3 Output" to "Auto" (page 20).
2
+/– button on the remote control.
menu (page 19).
coaxial cable.
occur.
cannot select it.
cabinet to expand or contract, which can make slight noises.
This does not indicate a malfunction.
malfunction.
is turned on. This does not indicate a malfunction.
does not indicate a malfunction.
according to the device you are using (VCR, TV or DVD).
even when the Media Selector has been set correctly, enter
the necessary code set as explained in "Remote Control
Configuration for VCR/DVD" on page 31.