Sony KZ-32TS1E Operating Instructions Manual page 18

Adjust Pixel
Adjust Pixel is only available for the RGB input signal connected to
connector and the "AV5 Input"option is set to "RGB" in the "Features" menu.
Reset
18
Menu System
The "Adjust Pixel" option allows you to adjust the picture from an
RGB piece of equipment.
To do this:
1 After selecting the option, press
2 Press
or to select the following option.
Auto Adjust:
Select OK to automatically make the best picture for the input
signal. Note that it may not be adjusted perfectly depending
on the input signal condition or picture pattern. In this case,
perform Auto Adjust again.
Dot phase:
Adjust between 00-63 when part of a displayed text or image
is not clear.
Total H Pixel (Total Horizontal Pixel):
Adjust when the whole picture is not clear as a whole.
Reset:
Reset to the factory settings.
Cancel / OK
Select OK to reset "Screen Zoom", "Screen Size" and "Screen Shift"
options to the factory preset
.
5