Using Song With A Different Tempo Than That Of The Performance Data - Roland MUSIC ATELIER Series Owner's Manual

If the following screen appears
If you select a number at which performance data has already been saved, the following screen appears.
If you wish to update the contents of the performance data
1. Press the [Rec] button.
If you want to save your performance as new data without overwriting the existing data
1. Press the [Reset] button to stop the Save operation.
2. In the Song Select screen, select the number that is displayed as "------------" (a number that currently does not contain
performance data).
3. Save the performance data.
When saving is complete, the saved performance name will be displayed.

Using Song with a Different Tempo Than That of the Performance Data

Here's how to change the tempo of performance data that you've saved.
4
1. Prepare the performance data whose tempo you want to change.
If you're using performance data from USB memory, connect it to the USB Memory connector.
2. Load the performance data into the ATELIER (p. 80).
3. Determine the tempo with the Tempo [
4. Hold down the panel [Reset] button and press the [Rec] button.
The tempo of the performance data will change.
3
] [ ] buttons.
83