Layering A New Recording Onto Smf Music Files - Roland MUSIC ATELIER Series Owner's Manual

Layering a new recording onto SMF music files

You can load commercially available SMF music files into the ATELIER, and record your own performance on top of it. During recording, the data you've
loaded will be played back, while you record your performance.
4
2
1. Prepare the SMF music files.
If you're using SMF music files from USB memory, connect it to the USB Memory connector.
2. Press the [Song] button (confirm that its indicator is lit).
The Song Select screen appears.
3. Press the [Media] button to select "USB Memory."
4. Press the Value [-] [+] buttons to select the SMF music files that you wish to load into internal memory.
5. Press the [Load] button.
The selected performance data will be loaded into internal memory.
6. Select the panel settings needed for recording the performance.
7. Record as described in "Re-recording" (p. 78).
MEMO
The performance data you recorded can be saved on a USB memory, or "Favorites" (p. 81).
* Commercially sold music files can also be loaded into the ATELIER, but for reasons of copyright protection, cannot be saved in SMF format.
* The performances of Channel 2 in SMF music files are deleted when pedal performances are recorded over again.
3
5
79