BMW R 1200 GS 2005 Rider's Manual page 50

4
48
Turn key 1 clockwise in the
seat lock, while pressing
down the front part of rear
z
seat 2.
Lift rear seat 2 at the front
and remove the seat.
Installing rear seat
If too much pressure is
applied in the forward
direction, there is a danger
that the motorcycle will be
pushed off its stand.
Always make sure that the
motorcycle is stable and
firmly supported.
Engage rear seat 2 in the
rear catch.
Push down firmly on rear
seat 2, applying pressure to
the front of the seat.
The rear seat engages with
an audible click.
Removing front seat
Make sure the ground is
level and firm and place the
motorcycle on its stand.
Removing rear seat (
Turn key 1 counter-
clockwise in the seat lock,
while pressing down the
rear part of front seat 3.
Lift front seat 3 at the rear
and remove the seat.
Installing front seat
If too much pressure is
applied in the forward
direction, there is a danger
that the motorcycle will be
47)
pushed off its stand.
Always make sure that the
motorcycle is stable and
firmly supported.